Created 2/27/04
Specifications from run_1.rhw
_____________________________
GEOMETRY

Geometry:	Planar
_____________________________
SPATIAL GRID
REGIONS
(1)	mylar_1
	
	INTIAL CONDITIONS
	Thickness:	1.4 microns
	Mass Density:	1.39 g/cc
	# of Zones:	20
	Mean At. Wgt.:	8.735 amu
	Temperature:	0.025 eV
	Velocity:	0 cm/s

	EOS		
	Type:		Sesame
	Location:	Library
	Directory:	
	EOS file:	matr_07590_polystyrene.ses

	OPACITY
	Type:		Propaceos
	Location:	Library
	Directory:	
	Opacity file:	run3_undoped.prp
	
	CONDUCTIVITY
	Model:		Spitzer

(2)	neon
	
	INITIAL CONDITIONS	
	Thickness:	1.1 cm
	Mass Density:	3.6e-005 g/cc
	# of Zones:	20
	Mean At. Wgt.:	20.18 amu
	Temperature:	0.025 eV
	Velocity:	0 cm/s

	EOS
	Type:		Sesame
	Location:	Library
	Directory:	
	EOS file:	matr_05410_neon.ses
	
	OPACITY
	Type:		Propaceos
	Location:	Library
	Directory:	
	Opacity file:	Ne.prp

	CONDUCTIVITY
	Model:		Spitzer
	
(3)	mylar_2

	SAME AS mylar_1

SHOULD DISPLAY
REGION NAME	R(MIN) [CM]	R(MAX) [CM]
mylar_1		0		0.00014
neon		0.00014		1.10014
mylar_2		1.10014		1.10028

_____________________________
HYDRO

Energy Model:	T(ion) = T(electron)
_____________________________
RADIATION TRANSPORT

Transport Model:	Multiangle
# of Angles:		2
Freq. Group Setup:	Typical
# of Freq. Groups:	50
_____________________________
LASER SOURCE

[none]
_____________________________
RADIATION SOURCE

Include incident radiation field at:	R(min)
Radiation Model at R(min):		Visrad file, *.dat
_____________________________
TIME CONTROLS

Max. Sim. Time:		1.1e-007 sec
Max. # cycles:		1000000
_____________________________
OUTPUT

Mode:				Time-based
Time-based Output Intervals:	Use same output times for all files
Binary Plot File Output:	
       Beginning at (sec):	Output every (sec):
       0			1e-008
_____________________________
RUN SIMULATION