======================================================================== Model windprof<1> + powerlaw<2> Source No.: 1 Active/On Model Model Component Parameter Unit Value par comp 1 1 windprof q 0.0 frozen 2 1 windprof taustar 3.04058 +/- 0.868294 3 1 windprof u0 0.819879 +/- 0.562152 4 1 windprof h 1.89758E-02 +/- 0.281018 5 1 windprof tau0star 0.0 frozen 6 1 windprof beta 1.00000 frozen 7 1 windprof betaSob 0.0 frozen 8 1 windprof numerica 1 frozen 9 1 windprof anisotro 1 frozen 10 1 windprof rosselan 1 frozen 11 1 windprof expansio 0 frozen 12 1 windprof thick 0 frozen 13 1 windprof waveleng "A" 18.9690 frozen 14 1 windprof shift "mA" 0.0 frozen 15 1 windprof velocity "km/s" 2250.00 frozen 16 1 windprof verbose 0 frozen 17 1 windprof norm 3.69846E-04 +/- 5.19423E-05 18 2 powerlaw PhoIndex 2.00000 frozen 19 2 powerlaw norm 2.40000E-03 frozen ________________________________________________________________________ C-statistic = 150.83 using 130 PHA bins and 126 degrees of freedom. maybe this is a bit weird, because C is lower than for non-porous case. But hinf isn't exactly 0, so... XSPEC12>goodness 1000 nosim 87.70% of realizations are < best fit statistic 150.83 XSPEC12>error 1. 2 Parameter Confidence Range (1.0000000) 2 2.477399 4.012814 (-0.574463,0.960952) XSPEC12>error 2.7 2 Parameter Confidence Range (2.700000) 2 1.923167 5.190684 (-1.136237,2.131280) XSPEC12>error 1. 3 Parameter Confidence Range (1.000000) ***Warning: Parameter pegged at hard limit: 0.99 3 0.633637 0.000000 (-0.186848,-0.820485) XSPEC12>error 2.7 3 Parameter Confidence Range (2.7) ***Warning: Parameter pegged at hard limit: 0.99 3 0.517886 0 (-0.314784,-0.83267) XSPEC12>error 1. 4 Parameter Confidence Range (1) ***Warning: Parameter pegged at hard limit: 0 4 0 0.277857 (-0.015186,0.262671) XSPEC12>error 2.7 4 Parameter Confidence Range (2.7) ***Warning: Parameter pegged at hard limit: 0 4 0 0.634978 (-0.0180981,0.61688) XSPEC12>steppar 4 0.01 0.75 37 C-Statistic Delta h C-Statistic 4 150.84 -0.11368 0 0.01 150.92 -0.037241 1 0.03 150.85 -0.099141 2 0.05 151.04 0.083233 3 0.07 151.12 0.16534 4 0.09 151.05 0.09925 5 0.11 151.11 0.15992 6 0.13 151.2 0.24676 7 0.15 151.42 0.47221 8 0.17 151.39 0.43434 9 0.19 151.49 0.54155 10 0.21 151.59 0.63457 11 0.23 151.69 0.73445 12 0.25 151.79 0.83446 13 0.27 151.89 0.93478 14 0.29 151.99 1.0351 15 0.31 152.09 1.1355 16 0.33 152.19 1.2358 17 0.35 152.29 1.3353 18 0.37 152.39 1.4336 19 0.39 152.61 1.6616 20 0.41 152.67 1.7187 21 0.43 152.67 1.7213 22 0.45 152.9 1.945 23 0.47 152.86 1.9077 24 0.49 152.99 2.042 25 0.51 153.08 2.1322 26 0.53 153.15 2.2005 27 0.55 153.33 2.3767 28 0.57 153.42 2.4632 29 0.59 153.5 2.5491 30 0.61 153.56 2.6058 31 0.63 153.59 2.6339 32 0.65 153.76 2.8081 33 0.67 153.84 2.8915 34 0.69 153.93 2.9741 35 0.71 154.01 3.0561 36 0.73 154.09 3.1374 37 0.75 XSPEC12>error 1. 17 Parameter Confidence Range (1) 17 0.000344019 0.000397877 (-2.63362e-05,2.75214e-05) XSPEC12>error 2.7 17 Parameter Confidence Range (2.7) 17 0.00032769 0.000416271 (-4.26857e-05,4.58948e-05) PLT> wdata /home/cohen/xspec/2007/zpup/oviii_18969_anisoporous.dat XSPEC12>log /home/cohen/xspec/2007/zpup/oviii_18969_anisoporous_hvstaustar_35by35.log Logging to file:/home/cohen/xspec/2007/zpup/oviii_18969_anisoporous_hvstaustar_35by35.log XSPEC12>steppar 4 0. 5. 35 2 0. 10. 35 XSPEC12>log /home/cohen/xspec/2007/zpup/oviii_18969_anisoporous_taustarvsumax_35by35.log Logging to file:/home/cohen/xspec/2007/zpup/oviii_18969_anisoporous_taustarvsumax_35by35.log XSPEC12> steppar 2 0.01 4.5 35 3 0.48 0.99 35