Workspace Format ID = 1 [Header Data]: Format ID = 1 Plasma Grid Generator Version_2.1.1 Geometry Type = 111 Simulation Time = 0 [End Header Data] [Materials Data]: # # Format ID: 1 # # Parmeters of Materials: Number of Materials = 1 Material_1; [End Materials Data] [Target Component Data]: # # File format ID: 5 # # OBJECT PARAMETERS: Number of Objects = 2 ===>BEGIN Parameters for Object: Slab_1D_1 9 = object_type 1e+010 = length_1 2e+010 = length_2 0 = length_3 0 = length_4 11 = mesh_pts_1 0 = mesh_pts_2 0 = mesh_pts_3 0 = mesh_pts_4 0 = normals_in_out 0 = set position of 0 = coord. system type 1.05e+011 = position_1 0 = position_2 0 = position_3 0 = tilt_angle 0 = rotate_angle 0 = spin_angle 1 = material_index 0 = temp fn type 0 = dens fn type Material_1; (material_name) 500; (temperature expression) Plasma Grid; (temperature ref coord sys) 1.67e-14; (density expression) Plasma Grid; (density ref coord sys) 1 = num_sub_objects Parameters for Sub-Object: 0 0.619608 = red_value 0.368627 = green_value 0.368627 = blue_value 0 = n_bounding_volumes ===>END Parameters for Object: Slab_1D_1 ===>BEGIN Parameters for Object: Slab_1D_0 9 = object_type 1e+011 = length_1 2e+010 = length_2 0 = length_3 0 = length_4 11 = mesh_pts_1 0 = mesh_pts_2 0 = mesh_pts_3 0 = mesh_pts_4 0 = normals_in_out 0 = set position of 0 = coord. system type 5e+010 = position_1 0 = position_2 0 = position_3 0 = tilt_angle 0 = rotate_angle 0 = spin_angle 1 = material_index 0 = temp fn type 0 = dens fn type Material_1; (material_name) 1.6; (temperature expression) Plasma Grid; (temperature ref coord sys) 1.67e-14; (density expression) Plasma Grid; (density ref coord sys) 1 = num_sub_objects Parameters for Sub-Object: 0 0.2 = red_value 0.619608 = green_value 0.8 = blue_value 1 = n_bounding_volumes ----- Parameters for Bounding Volume Index: 0 Name:CV_Slab_1D_1 2 = bd_vol_type 1e+010 = length_1 2.4e+010 = length_2 1 = length_3 0 = set position of 0 = coord. system type 5.5e+010 = m_position_1 0 = m_position_2 0 = m_position_3 0 = n_mesh_pts_1 1 = normals_in_out 0 = tilt_angle 0 = rotate_angle 0 = spin_angle 0 = clipVolIsExplicit UnSpecifieD; (ref. coord. sys.) ===>END Parameters for Object: Slab_1D_0 [End Target Component Data] [Dialog Settings Data]: Format ID = 1 [End Dialog Settings Data]