Mg XI 9.1687, 9.2297, 9.3143 Angstroms

Non-porous models

Note: Both MEG and HEG are being fit simultaneously. See the fitting log. We used the hewind model, which fits the three components with separate wind profile models in which the relevant parameters are tied together, including the radius-dependent relative emissivities of the forbidden and intercombination lines. In other words, the line ratios and line shapes are self-consistently accounted for.

Continuum fit on 8.8:8.9 and 9.5:9.6. View the spectral region near the line: MEG and HEG. For n=2, best-fit norm=1.55e-3. The 68% confidence limits on the normalization are +/- 1e-4. And the best fit is formally a good fit.

Mg XI 9.1687: non-porous MEG

Mg XI 9.1687: non-porous HEG
[9.07:9.40], λo = 9.1687, 9.2297, 9.3143
vinf=2250
β=1
powerlaw continuum, n=2; norm=1.55e-3
q=0
hinf=0
taustar=0.92   +/- (0.76:1.11)
uo=0.645   +/- (0.621:0.670)
G=0.723   +/- (0.675:0.779)
norm=1.78e-4 +/- (1.73e-4:1.86e-5)
rejection probability = 37% (C=410.31; N=392)

Here are the 68%, 90%, and 95% joint confidence limits on taustar and uo. The asterisk represents the best-fit model, shown as the red histograms on the above plot.

Mg XI 9.1687: joint uo taustar constraints using MEG and HEG data

 

We fit porous models to this line complex but found that the porosity length was very poorly constrained.

 

Back to main page.


last modified: 14 October 2008